"Making a Besom"
design & creation by: Edain McCoy
Here are some easy to follow directions for handcrafting your own besom by Edain. If you would like a Besom of your own, they are fairly easy to find in craft stores, country markets, or folk art fairs. You can also invest your energies into making one, a good idea if you wish to use it in place of a Wand or other ritual tool.
To make a Besom you will need a four-foot dowel one inch in diameter, a ball of twine, scissors, and straw or other long strands of pliable herbs.
Take the straw, or another herb you have chosen for the bristles, and allow them to soak overnight in warm, lightly salted water. The water softens the straws to make them pliable, and the salt soaks out former energies.
When you are ready to make your Besom, remove the straws from the water and allow them to dry a bit, but not so much that they lose the suppleness you will need to turn them into your Besom.
Find a work area where you can lay out the length of your dowel, and begin lining the straws alongside the dowel. Starting about three inches from the bottom, lay the straws, moving backward, along the length of the dowel. Begin binding these to the dowel with the twine. You will need to tie them very securely. You can add as many layers of straw as you wish, depending on how full you would like your Besom to be.
When the straw is secured, bend the top straws down over the twine ties. When they
are all gently pulled over, tie off the straws again a few inches below the original tie. Leave the Besom overnight to allow the straw to dry.
The dowel part of the Besom can be stained, painted, or decorated with Pagan symbols, your Craft name, or any other embellishments you choose. Dedicate your finished Besom in your Circle as you would any other ritual tool. ~From Edain McCoy's book “The Sabbats: A New Approach to Living the Old Ways” (C) 1994.
When I handcrafted my own besom, I followed Edain's easy design but I substituted a special branch from a special tree to use in place of a dowel. I stripped the bark off and sanded it by hand. I did not use any type of stain because I wanted a natural look. This is also how I crafted my wedding besom. I used willow from a tree that fell after a storm for the bristle parts and after it was dried I tied them on with raffia strips. Since then I have made many besoms for people that have asked. There are so many things to try, experiment and have fun. After all the things that we make ourselves and put love into are the ones that obtain a piece of ourselves in the work.